The comprehensive set for the building of a 4-meter greenhouse 3 sheets of mobile polycarbonate in the form of rolls of 2.1 m in length and a diameter of 60-90 cm. The thickness of this material is 4 mm.

If you would like, you can increase the amount of the structure to 6 metres or more. To do this, it’s sufficient to join a two-meter extension. When selecting a drawing, pay attention to the space between the arches. This figure needs to be 65 cm, and that’s the most appropriate length for the specified thickness of this material. The diameter of the doorways based on the producer’s drawing is 90 cm.

Before building a polycarbonate greenhouse, then it is necessary to choose a place because of the location. If that is done correctly, you can provide yourself with a crop of fresh vegetables for the entire calendar year.

The location for your future greenhouse is marked immediately in the preparation of the garden plot. To be able to melt the snow in the positioning of the greenhouse as soon as possible, the ideal point on the website will be a small elevation. In addition, in such a location will not need to worry about substantial humidity as soil and atmosphere within the building.

Build a polycarbonate greenhouse on an elevated site – means to care for the best temperature inside.

If it isn’t feasible to place a greenhouse on an elevated position, you’ll need to pour a coating of fine shattered rock about 20 cm and the same layer of fertile land to make seedbeds.

Before assembling a greenhouse on your backyard plot, you should also consider where and how this construction is going to be installed. First, you have to pick a place for it. The greenhouse ought to be found in a metropolitan region at least a few meters away from homes, barns and other structures.

The best way to Put in a greenhouse Based on the Faces of the Planet

Be sure to level the dirt surface – it is ideal to remove the surface. This can also get rid of weed seeds. And for ease of work, eliminate the soil in a place that’s around a meter wider on all sides of the rectangle you desire.

In addition, it is worth thinking about having a base. As producers state, now most greenhouses don’t need that, particularly if they (greenhouses) are used only in the summer and spring time. But, experienced gardeners still recommend earning a basic basis from a bar. It’s very simple – it’s sufficient to associate with each other utilizing metal corners and screws four parts of wood using a cross-section of 10 * 10 cm. The dimensions of such a base ought to be equal to the base of their future greenhouse.

Simple bar base

You may also make a strip base of concrete. He’s more dependable than a pub base, but requires more financial and labour costs. Incidentally, the greenhouse, that is utilised in the winter, with no and do not do without it at all.

Stages of the creation of a strip foundation: a schematic representation

Many producers counsel to set up greenhouse structures without even creating a foundation. Even for this purpose, they equip the framework with special T-shaped legs, so that the construction was firmly fixed. However, as practice shows, it is still necessary to construct a base: therefore and the foundation will be more rigorously fixed and also the elements of the basis that are in contact with the soil, will be saved much longer in its original condition.

The most important issue is to gidpostroy.ru take care of the material with special agents to protect the timber from moisture. The substance is generally installed on concrete cubes that are dug into the ground. To get a six-meter structure, they want 10 pieces: four on either side and one in the center of the endings.

Before you perform the greenhouse itself, you want to select the right place for this. It has to be an even site, so that the framework was located evenly, without distortions. It should be sunny and not obscured by buildings or trees.